Air compressor installation site selection guide - Kappa air compressor

Air compressor installation site selection is required, this period of Kapa specifically collated the relevant information, bring you the air compressor installation site selection guide, together with Kappa Xiaobian look at it.

In the scope of application of twin screw air compressor, compared with the corresponding piston air compressor, the disadvantage of twin screw is high acquisition cost, but this can be made up from the low use cost and long life of twin screw

1, when the air compressor is installed, it must be a wide place with good lighting to facilitate operation and maintenance.

2, the relative humidity of the air should be low, less dust, the air is clean and well-ventilated, away from flammable and explosive, corrosive chemicals and harmful unsafe items, avoid close to places that emit dust.

3, when the air compressor is installed, the ambient temperature in the installation site should be higher than 5 degrees in winter and lower than 40 degrees in summer, because the higher the ambient temperature, the higher the air compressor discharge temperature, which will affect the performance of the compressor, if necessary, the installation site should be set up ventilation or cooling devices.

4. If the factory environment is poor and there is much dust, it is necessary to install pre-filter equipment.

5. The air compressor unit in the air compressor installation site should be arranged in a single row.

6, reserved access, with conditions can be installed crane, to facilitate the maintenance of air compressor equipment.

7, Reserve maintenance space, the air compressor and the wall must have at least 70 cm distance.

8. The distance between the air compressor and the top space is at least one meter.

Jiangxi Kapa Gas Technology Co., LTD. The main products are two-stage compression screw air compressor, permanent magnet variable frequency screw air compressor, vacuum pump, gas storage tank, blower, freeze dryer, adsorption dryer, precision filter, consumable spare parts, etc. Welcome to contact Kapa consulting business!