Kapa air compressor manufacturers teach you air compressor equipment maintenance methods

Air compressor manufacturers have sorted out the relevant information and taught you the maintenance method of air compressor equipment, so that the air compressor can have a longer service life, the price of air compressor is relatively high, and the service time can be extended and the cost can be amortized through the special maintenance method of air compressor equipment.

Basic maintenance:

In order to ensure the normal and reliable operation of the air compressor and ensure the service life of the unit, it is necessary to develop a detailed maintenance plan, perform regular operation, regular maintenance, regular inspection and maintenance, so that the air compressor unit can be kept clean, oil-free and dirt free.

Clean heat dissipation:

To remove dust on the cooling surface after the air compressor runs for about 2000 hours, open the cover of the cooling hole on the fan support and use the dust gun to purge the cooling surface until the dust is cleared. If the cooling surface is too dirty to be cleaned, remove the cooler, pour out the oil in the cooler and close the four inlet and outlet to prevent the entry of dirt, then blow the dust on both sides with compressed air or rinse with water, and then blow dry the water stains on the surface. Put it back in place.

Condensate:

Moisture in the air may condense in the oil and gas separation tank, especially in wet weather, when the exhaust temperature is lower than the pressure dew point of the air or when the machine is shut down for cooling, more condensed water will be precipitated. Too much water in the oil will cause the emulsification of the lubricating oil, which will affect the safe operation of the machine

Maintenance Suggestions:

The safety valve has been adjusted before the whole machine leaves the factory, and the supplier does not advocate users to adjust the safety valve without permission. If it is necessary to adjust, it should be carried out under the guidance of the local labor safety department or the supplier's maintenance personnel to avoid adverse consequences.

Compressor oil:

In the running state, the oil level of the compressor should be kept between the low and high oil level, more oil will affect the separation effect, less oil will affect the lubrication and cooling performance of the machine, in the oil change cycle, if the oil level is lower than the low oil level, the lubricating oil should be added in time.

Jiangxi Kapa Gas Technology Co., Ltd. focuses on two-stage compression screw air compressor, permanent magnet variable frequency screw air compressor, air compressor, screw vacuum pump, blower, consumable spare parts products for many years, always adhere to the combination of product sales and technology development, so as to enhance product value. If you are interested in distributing gas compressor equipment, please contact us for business consultation!